Chat with us, powered by LiveChat Active Filter Design Techniques*****Already A++ Rated Tutorial Use As Guide Paper***** | Writedemy

Active Filter Design Techniques*****Already A++ Rated Tutorial Use As Guide Paper*****

01 Jul Active Filter Design Techniques*****Already A++ Rated Tutorial Use As Guide Paper*****

Posted at 13:28h in College by

ASSIGNMENT:

Active Filter Design Techniques

  1. Refer to Chapter 6 in the text as needed.
  2. Using the Fast, Practical Filter Design technique presented in section 6.3 design the following.  Be sure to show all work for full credit.
  1. Low-Pass Filter with critical frequency = 10kHz.
  2. High-Pass Filter with critical frequency = 10kHz.
  3. Narrow-Bandpass Filter with critical a band of 100kHz
  1. Create a MultiSIM schematic of each of your designs.  Provide a screenshot.
  2. Perform a simulation of each design to demonstrate the filter behavior.  Take a screenshot.
  3. From your simulation and screenshot in the above step, what is the gain in dB at the critical frequency for the low-pass filter and the high-pass filter?  What is the bandpass of the bandpass filter, and how did you determine it?
  4. If you were to implement your high-pass filter in hardware, what considerations would you need to take into consideration?  How would these considerations impact the performance and the extent to which you would meet specifications?  Be specific!  Provide specific examples of the issues you would encounter based on your specific initial design and actions you would need to take to finalize your design.  Is there anything you would have done differently to create your initial design in step 2 above if you had thought about an implementation in hardware from the beginning?
  5. Include all your calculations and screenshots in a Word Document with the title: “HW2_StudentID”, with your student id substituted in the file name.  Show all work for full credit.
  6. Upload file “HW2_StudentID”

 

LAB:

The purpose of this lab is to demonstrate how to use Multisim in order to produce Bode Plots via AC Analysis. This plot will allow for a determination of the range of frequencies for which an op-amp circuit operates optimally. Students will make adjustments to external bias resistors to determine the relationship between gain and frequency in op-amp circuits.

  1. Watch video Week 2 – Bode Plot
  2. Construct an Active Filter (An Op-Amp configuration presented in the video) in Multisim and compute the gain of the amplifier (in db – Decibels) for the following combinations of RF and RG.
  3. Perform AC Analysis to measure the gain of the amplifier (Use 5% resistor tolerances for simulation) and complete the table below:
RF RG Calculated OpAmp Gain (in db) = Vout/Vin Measured OpAmp Gain (in db) = Vout/Vin
2kΩ 10kΩ
2kΩ 20kΩ
2kΩ 40kΩ
10kΩ 5kΩ
20kΩ 5kΩ
40kΩ 5kΩ
  1. Take the screen shots of bode plot for each of the above combinations of RF and RG.
  2. For the Op-Amp Circuit, answer the following questions:
    1. Does the measured values of the gain match the calculated values? If not, explain why they are different?
    2. What is the cutoff frequency you measured from the simulation?
    3. Based on the cut off frequency, what type of active filter is constructed in this lab?
    4. From your measurements, explain how increase in RG affects the gain of the amplifier? How does bode plot change with increase in RG?
    5. From your measurements, explain how increase in RF affects the gain of the amplifier? How does bode plot change with increase in RF?
    6. What is the effect of resistor tolerance on the gain of the filter?
  3. Create a new word document called “Lab2_StudentID.docx” with your GID substituted into the file name.
  4. Verify all calculations from analysis and measurements from simulation. Save the results along with the table and paste the screen captures in the word document. Make sure to answer the questions.

Our website has a team of professional writers who can help you write any of your homework. They will write your papers from scratch. We also have a team of editors just to make sure all papers are of HIGH QUALITY & PLAGIARISM FREE. To make an Order you only need to click Ask A Question and we will direct you to our Order Page at WriteDemy. Then fill Our Order Form with all your assignment instructions. Select your deadline and pay for your paper. You will get it few hours before your set deadline.

Fill in all the assignment paper details that are required in the order form with the standard information being the page count, deadline, academic level and type of paper. It is advisable to have this information at hand so that you can quickly fill in the necessary information needed in the form for the essay writer to be immediately assigned to your writing project. Make payment for the custom essay order to enable us to assign a suitable writer to your order. Payments are made through Paypal on a secured billing page. Finally, sit back and relax.

Do you need an answer to this or any other questions?

About Writedemy

We are a professional paper writing website. If you have searched a question and bumped into our website just know you are in the right place to get help in your coursework. We offer HIGH QUALITY & PLAGIARISM FREE Papers.

How It Works

To make an Order you only need to click on “Order Now” and we will direct you to our Order Page. Fill Our Order Form with all your assignment instructions. Select your deadline and pay for your paper. You will get it few hours before your set deadline.

Are there Discounts?

All new clients are eligible for 20% off in their first Order. Our payment method is safe and secure.

Hire a tutor today CLICK HERE to make your first order

Print page