Devry BIS245 week 5 ilab

Part A:You have been asked to create a database model using the MS Visio Database Model Diagram Template. The purpose of this lab is to provide experience normalizing the database to third normal form based on limited instructions, data requirements, and associated business rules.

Upon completing this lab, you will be able to:

• create a new Visio file for database design; and
• using the data requirements and the business rules provided, develop a conceptual model (ERD), including attribute data types and required field lengths.

Part B:The lab begins with creating a form in Access using the Form Wizard. After the form is created, the user can use Themes to change the appearance of the form. The second part of the lab uses Form Design to create a form. Finally, the form will be customized.

Upon completing this lab, you should be able to:

• create a form using the Form Tool;
• create a form using Form Design; and
• create a form using the Form Wizard.

Deliverables

Part A: Step 1:YourName_Lab5A_ERMatrix.docx
Part A: Step 3:YourName_Lab5A.vsd (Visio Diagram)

Part B: Step 7:YourName_Lab5B_Final.accdb (Access Database)

A. Lab # : BSBA BIS245A-5A

B. Lab 5A of 7 :Database design using Visio, and based on data requirementsand business rules focusing on normalizing data to third normal form.

C. Lab Overview–Scenario/Summary:

TCO(s):

2. Given a situation containing entities, business rules, and data requirements, create the conceptual model of the database using a database modeling tool.

Scenario:

You have been asked to create a database model using the MS Visio Database Model Diagram Template. The purpose of this lab is to provide experience normalizing the database to third normal form based on limited instructions, data requirements, and associated business rules.

Upon completing this lab, you will be able to

1. create a new Visio file for database design; and

2. using the data requirements and the business rules provided, develop a conceptual model (ERD), including attribute data types and required field lengths.

D. Deliverables

Section	Deliverable	Points
Step 1	YourName_Lab5A_ERMatrix.docx
Step 3	YourNameLab5A.vsd (Visio Diagram)
E. Lab Steps

Preparation

1. Get the Lab5A_ERMatrix.docx document from Doc Sharing:

a. Download the Lab5A_ERMatrix document file from your course Doc Sharing panel (Labs view), and Save the file to your local drive.

2. Using Citrix for MS Visio and/or MS Access

a. If you are using the Citrix remote lab, follow the login instructions located in the iLab tab in Course Home.

3. Start MS Visio

a. Open Microsoft Office, Visio application, or

b. if you are using Citrix, click on Microsoft Office Applications folder to start Visio.

Page1 of 5

Lab

Step 1:Identify the entities and relationships.

a. Over the past four weeks, you have created ERDs based on information provided. This week, you will complete the ERD being sure to normalize it to 3NF (third normal form). Normalization is the systematic application of rules designed to eliminate redundancy from the database. Data in previous weeks was, to some extent, normalized for you. This week, it is not. An abbreviated list of the data requirements follows.

College SchedulingData Requirements

Student ID

Student First Name

Student Last Name

Course Code

Course Name

Course Description

Course Credit Hours

Course Time

Course Days

Instructor ID

Instructor First Name

Instructor Last Name

Room Number

Room Capacity

b. Open the Word file in the Week 5 Lab Materials, Lab5A_ERMatrix.docx

c. Save the Word file as YourName_Lab5A_ERMatrix.

d. An ER Matrix helps define both the entities and the relationships between the entities. Using the partially completed ER Matrix below as a guide, complete the matrix.

Hint: You should end up with four entities.

1. List each entity both across and down.

2. Determine whether a relationship exists between entities and define that relationship with a verb phrase. (NOTE: The entity with the greatest number of related entities is usually the center of the ER diagram.)

3. Identify minimum (Optional or Mandatory) and maximum (only one, or one or more).

Page2 of 5

			Student	Course
		Student	none	Enrolls in;
				Mandatory
				One or
		Course		more
		Is taken by:	none
			Optional
			One or
			more

e. Save the completed matrix to submit as part of your lab.

Step 2:Create the initial ERD based on the matrix.

a. Open a new blank Database Model Diagram in Visio. If you need assitance with this, refer to the Week 1 Lab Instructions. Be sure that all options are set consistent to those used in previous weeks so that you generate your model in Crow’s Foot notation.

b. One of the issues in denormalized data is that it can result in many-to-many relationships that are not compatible with the relational database. Visio does not allow creation of a many-to-many relationship because of this incompatibility. Therefore, for any many-to-many relationships in your data, you will need to create two one-to-many relationships. See the example below:

Page3 of 5

c. Based on the information from Step 1, create the initial ERD for the College Scheduling database including the many-to-many relationships. If you need assistance to create the entities, refer to labs from Weeks 1 and 2.

d. Assign the primary keys and attributes from the data requirements to the proper entities.

e. Save the file as YourName_Lab5A.vsd.

Step 3:Normalize the database

a. While the initial ERD is accurate, if you design a database without deviating from it, you will encounter problems. For example, a course is offered many times. If you use the course code, for example BIS245, as the primary key, you will only be able to list the course once. There are three possible solutions.

1. Assign another primary key, such as an auto-number field, so that the course can be listed multiple times. However, this is not acceptable because it introduces redundancy rather than reducing it.

2. Use a composite primary key consisting of the Course Code and the Section code. If you create a unique section code (EXAMPLE: YearTerm_Section or 2010SpringA_A), then you can list the course repeatedly. Again, this introduces redundancy, and is not an acceptable solution.

3. Split the table to create two tables. To stay consistent with DeVry terminology, create a second Section table. To ensure that a course is not entered twice, you might modify the Section code to include the course: BIS245_2010SpringA_A. By consistently using this format, you should not be able to duplicate the section, and can avoid a complicated composite key. However, as the Section table will serve as an associative entity, it is acceptable to borrow the primary keys of the parent tables.

b. Open the Visio file from Step 2, and add a new page. Change the page tab to read Revised. Revise the initial ERD based on the following information.

1. A Course may exist without being offered. It exists in the catalog. Courses are scheduled for a term and given a section. It is the schedule course (Section) that students enroll in, that are scheduled in rooms and assigned instructors.

2. A Student can exist without being enrolled in a course.

3. An Instructor can exist without being assigned to teach a course.

4. A Room can exist without being scheduled for a course.

c. Save the file with your revised ERD.

Page4 of 5

Lab 5A Final Deliverables

a. YourName_Lab5A_ERMatrix.docx (Word Document) from Lab 5A Step 1

b. YourName_Lab5A.vsd (Visio Diagram) from Lab 5A Step 3.

Submit these files to the Week 5 iLab Dropbox.

END OF LAB

Page5 of 5

Our website has a team of professional writers who can help you write any of your homework. They will write your papers from scratch. We also have a team of editors just to make sure all papers are of HIGH QUALITY & PLAGIARISM FREE. To make an Order you only need to click Ask A Question and we will direct you to our Order Page at WriteDemy. Then fill Our Order Form with all your assignment instructions. Select your deadline and pay for your paper. You will get it few hours before your set deadline.