Devry ECET330 final exam june

Devry ECET330 final exam june 2015
Page 1

Question 1.1. (TCO 1) The characteristics of dynamic memory compared to static memory are (Points : 8)

higher density, higher cost.

higher density, lower cost.

lower density, higher cost.

lower density, lower cost.

Question 2.2. (TCO 1) Which of the following is volatile memory? (Points : 8)

ROM

RAM

Flash

All of the above

None of the above

Question 3.3. (TCO 1) With a 24-bit address bus, we get _____ bytes of memory space. (Points : 8)

24M

16M

64M

64K

Question 4.4. (TCO 2) Which bus is bidirectional? (Points : 8)

Address

Data

Control

All of the above

None of the above

Question 5.5. (TCO 2) Which bus carries memory contents? (Points : 8)

Data bus

Address bus

Control bus

None of the above

Question 6.6. (TCO 2) The address bus is __________. (Points : 8)

bidirectional

unidirectional

able to be programmed to be either bidirectional or unidirectional

None of the above

Question 7.7. (TCO 3) To use JSR (or CALL) instruction, we must initialize _____ register. (Points : 8)

X

Y

PC

SP

Question 8.8. (TCO 3) Find the value of Register A for the following program.

LDAA #$55

EORA #$AA (Points : 8)

A = $00

A = $FF

A = $7F

None

Question 9.9. (TCO 3) The dollar sign ($) that precedes numbers in MC9S12 assembly language means that (Points : 8)

it is a hexadecimal number.

it is a decimal number.

it is immediate mode.

All of the above

None of the above

Question 10.10. (TCO 3) The largest value (in hex) that can be loaded into Register A of HCS12 is (Points : 8)

$08.

$255.

$65535.

$FF.

Page 2

Question 1.1.(TCO 4) What addressing mode is used for the instruction, INX? (Points : 8) Direct Indexed Inherent Immediate None of the above Question 2.2.(TCO 5) When instruction, “jsr”, is executed, the return address is stored at (Points : 8) PC. CCR. SP. memory pointed by SP. Question 3.3.(TCO 5) After the execution of the following code, the value in Register D is: LDAA #$BB LDAB #$CC ANDA #$0F ANDB #$F0 (Points : 8) $FFFF. $CCBB. $C00B. $0BC0. None of the above Question 4.4.(TCO 5) Which bit is used to indicate the sign of a 16-bit signed number? (Points : 8) D0 D15 D7 D1 Question 5.5.(TCO 5) In the following program, the maximum number of iterations is limited to _________. L1 CLRA NOP NOP DECB BNE L1 (Points : 8) 255 100 0x200 0x99 Question 6.6.(TCO 7) What C-language construct does the following assembly code implement? cmpb #10 bpl ADD37H addb #$30 bra CONT ADD37H: addb #$37 CONT: stab 0,x (Points : 8) Loop If If /else All of the above None of the above Question 7.7.(TCO 8) Assume that PORTB has a value of 0x37. Which of the following gives us unpacked BCD for 7? (Points : 8) PORTB = PORTB & 0x37; PORTB = PORTB | 0x30; PORTB = PORTB | 0x0F; PORTB = PORTB & 0x0F; Question 8.8.(TCO 8) The following program creates square wave pulses on PB0. What is the duty cycle? ORG $8000 LDS #$4000 LDAA #$FF STAA DDRB BACK BSET PORTB,%00000001 JSR DELAY JSR DELAY BCLR PORTB,%00000001 JSR DELAY JSR DELAY BRA BACK (Points : 8) 75% 66% 50% 25% Question 9.9.(TCO 8) Find the value for PORTB after the execution of the following code: PORTB = 0x55 ^ 0xFF; (Points : 8) PORTB = 0x05 PORTB = 0x0A PORTB = 0xAA PORTB = 0xFF Question 10.10.(TCO 8) Fill in the blank to get 0x38 on PORTB. unsigned char BCD_Byte = 0x89; unsigned char x; x = BCD_Byte & 0xF0; _____; PORTB = x | 0x30; (Points : 8) x=x>>4; x=x>>2; x=x<<4; x=x<<2;

Page 3

Question 1.1.(TCO 4) Write the assembly code to specify a word constant named num1 that has a value of $5423. a byte constant named num2 that has a value of 15. a word variable named big. (Points : 15) Question 2.2.(TCO 5) Given the value of Register B shown below, show the value of Register B and the carry after the execution of ASRB. Given the original content of Register B and carry flag 1 0 1 0 0 1 0 1 0 C Show the new values after executing: ASRB C (Points : 15) Question 3.3.(TCO 7) Write assembly instructions to clear Bit 5 of variable bar without changing other bits. (Points : 15) Question 4.4.(TCO 5) Show code for a nested loop to perform an action 10,000 times. (Points : 25) Question 5.5.(TCO 6) Write a C program to toggle PA2 of PORTA ON and OFF with a 1-ms delay after each toggle. Assume that clock frequency is 6.25 MHz. Write inline assembly-language code inside of the delay function.(Points : 35)

Our website has a team of professional writers who can help you write any of your homework. They will write your papers from scratch. We also have a team of editors just to make sure all papers are of HIGH QUALITY & PLAGIARISM FREE. To make an Order you only need to click Ask A Question and we will direct you to our Order Page at WriteDemy. Then fill Our Order Form with all your assignment instructions. Select your deadline and pay for your paper. You will get it few hours before your set deadline.